Automatic heat shrink wrapping machine

Mineral water – juice – oils – vinegar – detergents – cosmetics – tomato sauce – pickles – conserve – jam – ketchup – tahini – pickles – flour – canned food – baby milk – plastic and metal cans

External specifications of the product:

Heat shrink packaging system with two openings on both sides of the package.

• The possibility of packaging products without a carton base in the event that there is a fixed base for the product on the machine.

Packaging Roll Specifications:

• The machine is supplied with / 2 / upper and lower wrapping roll made of thermoplastic polyethylene.

• The machine is equipped with roller cushions with guides to ensure the stability of the packing film.

The largest outer diameter of the packing roll is / 40 / cm, the smallest inner diameter of the roll / 7.6 / cm.

Machine productivity:

• Machine productivity / 200 / packages per hour on average.

• The productivity of the machine depends on the size of the package, the quality of the polyethylene paper, and the thicknesses used.

Standard Specifications :

Wrapping mechanism.

The machine is made of galvanized iron.

Automatic ejection feeding unit equipped with front handle ejection position operated by pneumatic piston.

The presence of optical sensors to ensure that the parcel stops in the place specified for it.

The cutting mechanism works on compressed air (Binomatic) and is equipped with a continuous welding device, the welding temperature is controlled via a digital display and equipped with a cutting knife.

Roller feeding mechanism and it consists of the following elements:

Upper Roller Locker Motor.

Mechanical and electronic mechanism to ensure that the machine is fed with the roller automatically.

The cutting and welding mechanism consists of the following elements:

Pneumatic mechanism to move the cutting and welding bench with the ability to control its speed and time.

Thermal knife for cutting and welding operations with the ability to control its temperature by an electronic thermal controller.

The welding and cutting bench is provided with springs to ensure complete cutting.

The possibility of controlling the cutting and welding times with a timer.

The machine is equipped with a conveyor belt after the welding and cutting mechanism to ensure that the package enters the packaging tunnel within a specific system.

The machine is equipped with a thermal oven (thermal tunnel) within the following specifications:

The opening of the thermal tunnel measures 40 cm in height x 60 cm in width x 150 cm in length.

Heating is carried out by heaters with the ability to determine the required temperature by means of a digital electronic thermal controller

The tunnel is equipped with a chain for transporting the product.

Control system:

Side control panel contains.

Automatic switch and test.

Digital screens to control all machine movements and the longitudinal and transverse welding temperature.

Emergency stop switch.

All circuit breakers and contactors installed on the machine are French made from Schneider.

The speed of the machine is controlled by the inverter made in Korea.

Grounding connection (discharge charge) of all electrical appliances.

Machine metal:

All surfaces in contact with the packing materials are made of SS304 food stainless steel.

The machine body is steel with a thermal coating.

Working conditions:

Power supply: 220 V 50-60 Hz.

Compressed air: 2 cubic meters, pressure of 8 bar.

Ambient temperature: 10-40 ° C, and operating at temperatures above that should be avoided.

Ambient humidity: 10–90 non-condensing.

Warranty: One year against errors caused by poor manufacturing, starting from the date of receipt of the machine.

Commercial terms:

All equipment is guaranteed for 12 months, and after-sales service is for life.

Installation and operation: After the machines arrive at your factory, we can, based on your desire, send an expert to do the installation and commissioning of the machines and train the workers to guide you on operating the line.

We offer a wide range of shrink wrapping systems:

Packaging compartments

L-shaped welding (stamping) machines

Side (stamping) welding machines.

Stretch Wrapping Machines (Cellophane Stretch Wrapping).

Thermal encapsulation channels (shrink).

Integrated packaging solutions from A to Z.

Complete consumables for shrink wrapping machines.

Open chat