A thermostat is provided to monitor the temperature of hot water in mixers and it is equipped with an indicator to indicate the level of hot water inside .. Very important in the oil mixer its engines and its capacity and the motors we have in Al-Faisal is a Turkish industry brand CAMAK and the speed boxes are Italian …

Each line that is manufactured in Al-Faisal Extrogen Company is supplied with two mixers for taste and flavor. Each mixer has a capacity of about 200 kg. Made of food stainless steel 304 has been installed.

The mixers have a base made of stainless steel, equipped with wheels for easy movement and cleaning. The mixers are designed in an advanced engineering way to heat the oil.

In an indirect way, where the mixer is provided with an additional outer surface (double jacket), the distance between the two surfaces is 5 cm. Water is pumped within it to be heated later by

Italian-made electric heaters and in turn heats the oil inside the mixers (indirect heating, American Extrogen system to prevent the oil oxidation process) blade

Stirring and mixing with the bearing column with the bearing holder made of food stainless steel 304 Each mixer is equipped with a mechanical indicator to monitor the water level inside the drum

A jacket equipped with each mixer with a quick emptying slot to facilitate the cleaning process. Each mixer is equipped with a thermal heater, 2 Italian to heat hot water. Each mixer is equipped with a probe

A thermostat to monitor the heating temperature of water. Each wheel mixer is equipped with an Italian speed rating with a motor capacity of 1 HP 50-60 Hz. The mixers are equipped with a control panel

Electrical made of food stainless steel 304 contains temperature clocks, breakers and control switches, all from Schneider International when preparing the flavor

Add the oil with flavoring powder, along with other optional additives such as salt and sugar …

The temperature is set at 70 degrees. The mixing stirrer is turned on for 15 minutes, after which the flavor mixture with the oil becomes homogeneous and can be sprayed on the chips.

Open chat